Rudolph Buchheit, Ph.D.

Rebecca Burchett Liebert Dean of the College of Engineering

2018

• Feng, Z.; Hurley, B.; Li, J.; Buchheit, R., 2018, "Corrosion inhibition study of aqueous vanadate on Mg alloy AZ31." Journal of the Electrochemical Society 165, no. 2, C94-C102 -C94-C102.
• Klomjit, P.; Buchheit, R.G., 2018, "Characterization of inhibitor storage and release from commercial primers." Progress in Organic Coatings 114, 68-77 - 68-77.

2017

• Li, J.; Buchheit, R., 2017, "Development of zinc ferrocyanide ion exchange compounds for corrosion-inhibiting and sensing pigments." Progress in Organic Coatings 104, 210-216 -210-216.
• Guo, X.; Hurley, B.; Yang, F.; Buchheit, R., 2017, "A Novel Organic Conversion Coating based on N-Benzoyl-N-Phenylhydroxylamine Chemistry for the Corrosion Protection of AA2024-T3." Electrochimica Acta 246, 197-207 - 197-207.

2016

• Hughes, A.E.; Mol, J.M.C.; Zheludkevich, M.L.; Buchheit, R.G., 2016, "Introduction."Springer Series in Materials Science 233, 1-17 - 1-17.

2015

• Li, J.; Birbilis, N.; Buchheit, R.G., 2015, "Electrochemical assessment of interfacial characteristics of intermetallic phases present in aluminium alloy 2024-T3." Corrosion Science 101, 155-164 - 155-164.

2014

• Cavanaugh, M.K.; Li, J-C.; Birbilis, N.; Buchheit, R.G., 2014, "Electrochemical Characterization of Intermetallic Phases Common to Aluminum Alloys as a Function of Solution Temperature." JOURNAL OF THE ELECTROCHEMICAL SOCIETY 161, no. 12,C535-C543 - C535-C543.
• Cavanaugh, M.K.; Li, J.C.; Birbilis, N.; Buchheit, R.G., 2014, "Electrochemical characterization of intermetallic phases common to aluminum alloys as a function of solution temperature." Journal of the Electrochemical Society 161, no. 12, C535-C543 -C535-C543.

2012

• Alyamac, E.; Gu, H.; Soucek, M.D.; Qiu, S. et al., 2012, "Alkoxysilane oligomer modified epoxide primers." Progress in Organic Coatings 74, no. 1, 67-81 - 67-81.

2007

• Paglia, C.S.; Buchheit, R.G., 2007, "The influence of a propane gas torch flame post-weld heat treatment on the mechanical and corrosion properties of a 2219-T87 friction stir weld." Welding and Cutting 6, no. 2, 96-102 - 96-102.
• Kim, Y.; Buchheit, R.G., 2007, "A characterization of the inhibiting effect of Cu on metastable pitting in dilute Al-Cu solid solution alloys." Electrochimica Acta 52, no. 7,2437-2446 - 2437-2446.

2006

• Paglia, C.S.; Jata, K.V.; Buchheit, R.G., 2006, "A cast 7050 friction stir weld with scandium: microstructure, corrosion and environmental assisted cracking." Materials Science and Engineering A 424, no. 1-2, 196-204 - 196-204.

2005

• Shell, E.B.; Buchheit, R.G.; Zoofan, B., 2005, "Correlation of residual fatigue life with quantified NDE measurements." International Journal of Fatigue 27, no. 2, 105-112 - 105-112.

2004

• Guan, H.; Buchheit, R.G., 2004, "Corrosion protection of aluminum alloy 2024-T3 by vanadate conversion coatings." Corrosion 60, no. 3, 284-296 - 284-296.
• Buchheit, R.C.; Cuan, H., 2004, "Formation and characteristics of Al-Zn hydrotalcite coatings on galvanized steel." Journal of Coatings Technology Research 1, no. 4, 277-290- 277-290.

2003

• Kendig, M.W.; Buchheit, R.G., 2003, "Corrosion inhibition of aluminum and aluminum alloys by soluble chromates, chromate coatings, and chromate-free coatings." Corrosion59, no. 5, 379-400 - 379-400.
• Laget, V.; Jeffcoate, C.S.; Isaacs, H.S.; Buchheit, R.G., 2003, "Dehydration-Induced Loss of Corrosion Protection Properties in Chromate Conversion Coatings on Aluminum Alloy 2024-T3." Journal of the Electrochemical Society 150, no. 9,
• Zhang, W.; Buchheit, R.G., 2003, "Effect of ambient aging on inhibition of oxygen reduction by chromate conversion coatings." Corrosion 59, no. 4, 356-362 - 356-362.

2002

• Leggat, R.B.; Taylor, S.R.; Zhang, W.; Buchheit, R.G., 2002, "Corrosion performance of field-applied chromate conversion coatings." Corrosion 58, no. 3, 283-291 - 283-291.
• Zhang, W.; Buchheit, R.G., 2002, "Hydrotalcite coating formation on Al-Cu-Mg alloys from oxidizing bath chemistries." Corrosion 58, no. 7, 591-600 - 591-600.

2001

• Kertz, J.E.; Gouma, P.I.; Buchheit, R.G., 2001, "Localized corrosion susceptibility of Al-Li-Cu-Mg-Zn alloy AF/C458 due to interrupted quenching from solutionizing temperatures."Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 32, no. 10, 2561-2573 - 2561-2573.
• Searles, J.L.; Gouma, P.I.; Buchheit, R.G., 2001, "Stress corrosion cracking of sensitized AA5083 (Al-4.5Mg-1.0Mn)." Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 32, no. 11, 2859-2867 - 2859-2867.

2000

• Buchheit, R.G., 2000, "Electrochemistry of θ (Al2Cu), S (Al2CuMg) and T1 (Al2CuLi) and localized corrosion and environment assisted cracking in high strength Al alloys."Materials Science Forum 331,
• Buchheit, R.G.; Martinez, M.A.; Montes, L.P., 2000, "Evidence for Cu ion formation by dissolution and dealloying the Al2CuMg intermetallic compound in rotating ring-disk collection experiments." Journal of the Electrochemical Society 147, no. 1, 119-124 - 119-124.

1999

• Buchheit, R.G.; Montes, L.P.; Martinez, M.A.; Michael, J. et al., 1999, "The Electrochemical Characteristics of Bulk-Synthesized Al2CuMg." Journal of the Electrochemical Society 146, no. 12, 4424-4428 - 4424-4428.

1998

• Buchheit, R.G.; Cunningham, M.; Jensen, H.; Kendig, M.W. et al., 1998, "A Correlation between Salt Spray and Electrochemical Impedance Spectroscopy Test Results for Conversion-Coated Aluminum Alloys." Corrosion 54, no. 1, 61-69 - 61-69.
• Renk, T.J.; Buchheit, R.G.; Sorensen, N.R.; Cowell Senft, D. et al., 1998, "Improvement of surface properties by modification and alloying with high-power ion beams." Physics of Plasmas 5, no. 5 PART 1, 2144-2150 - 2144-2150.
• Proskurovsky, D.I.; Rotshtein, V.P.; Ozur, G.E.; Markov, A.B. et al., 1998, "Pulsed electron-beam technology for surface modification of metallic materials." Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films 16, no. 4, 2480-2488 - 2480-2488.
• Buchheit, R.G., 1998, "Copper removal during formation of corrosion resistant alkaline oxide coatings on Al-Cu-Mg alloys." Journal of Applied Electrochemistry 28, no. 5, 503-510 - 503-510.
• Mansfeld, F.; Buchheit, R.G.; Cunningham, M.; Jensen, H. et al., 1998, "Discussion: A Correlation between Salt Spray and Electrochemical Impedance Spectroscopy Test Results for Conversion-Coated Aluminum Alloys." Corrosion (Houston) 54, no. 8, 595-597- 595-597.

1997

• Buchheit, R.G.; Grant, R.P.; Hlava, P.F.; Mckenzie, B. et al., 1997, "Local dissolution phenomena associated with S phase (Al 2CuMg) particles in aluminum alloy 2024-T3."Journal of the Electrochemical Society 144, no. 8, 2621-2628 - 2621-2628.

1996

• Drewien, C.A.; Eatough, M.O.; Tallant, D.R.; Hills, C.R. et al., 1996, "Lithium-aluminum-carbonate-hydroxide hydrate coatings on aluminum alloys: Composition, structure, and processing bath chemistry." Journal of Materials Research 11, no. 6, 1507-1513 - 1507-1513.

1995

• Buchheit, R.G.; Wall, F.D.; Stoner, G.E.; Moran, J.P., 1995, "Anodic dissolution-based mechanism for the rapid cracking, preexposure phenomenon demonstrated by aluminum-lithium-copper alloys." Corrosion 51, no. 6, 417-428 - 417-428.
• Buchheit, R.G.; Zavadil, K.R., 1995, "The Electrochemical Behavior of the AI3Ta Intermetallic Compound and Pitting in Two-Phase Al-Ta Alloys." Journal of the Electrochemical Society 142, no. 1, 51-58 - 51-58.

1994

• Buchheit, R.G.; Moran, J.P.; Stoner, G.E., 1994, "Electrochemical behavior of the T1(Al2CuLi) intermetallic compound and its role in localized corrosion of Al-2% Li-3% Cu alloys."Corrosion 50, no. 2, 120-130 - 120-130.
• Matsushita, Y.; Tamura, M.; Noda, I.; Drewien, C.A. et al., 1994, "Vinylpyridine triblock copolymer Copper enrichment on Al 2024 surface after de-oxidizing treatment."Macromolecules 27, no. 13, 3680-3682 - 3680-3682.
• Buchheit, R.G.; Bode, M.D.; Stoner, G.E., 1994, "Corrosion-resistant, chromate-free talc coatings for aluminum." Corrosion 50, no. 3, 205-214 - 205-214.

1993

• Scully, J.R.; Knight, T.O.; Buchheit, R.G.; Peebles, D.E., 1993, "Electrochemical characteristics of the Al2Cu, Al3Ta and Al3Zr intermetallic phases and their relevancy to the localized corrosion of Al alloys." Corrosion Science 35, no. 1-4, 185-195 - 185-195.

1990

• Buchheit, R.G.; Moran, J.P.; Stoner, G.E., 1990, "Localized corrosion behavior of alloy 2090. The role of microstructural heterogeneity." Corrosion 46, no. 8, 610-617 - 610-617.

2015

• Huang, I.W.; Buchheit, R.G. "Uniform corrosion dependence on temperature and ph of aluminum alloys 2024-T3." (1 2015).

2012

• Buchheit, R.G.; Birbilis, N. "APPLICATION OF MICROELECTROCHEMICAL METHODS FOR UNDERSTANDING LOCALIZED CORROSION BEHAVIOR OF ALUMINUM ALLOYS." (12012).
• Sukiman, N.L.; Gupta, R.K.; Birbilis, N.; Buchheit, R.G. "General aspects of the corrosion of aluminium alloys." (12 2012).

2010

• Cavanaugh, M.K.; Buchheit, R.G.; Birbilis, N. "Characterization of pit growth in Al alloys by neural networks." (12 2010).
• Sukiman, N.L.; Birbilis, N.; Buchheit, R.G. "Corrosion maps for aluminium alloys." (12 2010).

2009

• Hansen, D.C.; Davenport, A.J.; Lillard, R.S.; Fujimoto, S. et al. "ECS Transactions: Preface." (12 2009).
• Taylor, S.R.; Shiflet, G.J.; Scully, J.R.; Buchheit, R.G. et al. "Increasing coating functionality using nanodimensioned materials." (6 2009).

2008

• Cavanaugh, M.K.; Birbilis, N.; Buchheit, R.G. "A quantitative study on the effects of environment and microstructure on pit initiation in al-alloys." (12 2008).

2007

• Buchheit, R.G.; Chrisanti, S.; Ralston, K.D. "Molecular engineered ion exchange compounds for delivery of corrosion inhibitors and sensing environment ingress in coatings." (12 2007).
• Buchheit, R.G.; Mahajanam, S.P.V. "Ion exchange compounds for corrosion inhibiting pigments in organic coatings." (12 2007).

2006

• Kumar, G.; Buchheit, R.G. "Development and characterization of corrosion resistant coatings using natural biopolymer chitosan." (12 2006).
• Birbilis, N.; Buchheit, R.G.; Holloway, L.J. "Advances in monitoring the corrosion and protection of concrete reinforcement over the past decade." (12 2006).

2005

• Birbilis, N.; Cavanaugh, M.K.; Buchheit, R.G. "Electrochemical response of AA7075-T651 following immersion in NaCl solution." (12 2005).
• Birbilis, N.; Cavanaugh, M.K.; Buchheit, R.G.; Harlow, D.G. et al. "Understanding damage accumulation upon AA7075-T651 used in airframes from a microstructural point of view." (12 2005).
• Buchheit, R.G.; Birbilis, N.; Gambina, F. "Characterization and modeling of localized corrosion damage accumulation for aircraft structural integrity." (12 2005).
• Buchheit, R.G.; Chrisanti, S.; Mahajanam, S. "Corrosion inhibiting and sensing ion exchange pigments for organic coatings." (12 2005).

2004

• Colijn, H.O.; Kelly, T.F.; Ulfig, R.M.; Buchheit, R.G. "Site-specific FIB preparation of atom probe samples." (9 2004).
• Chrisanti, S.; Mahajanam, S.; Buchheit, R.G. "The use of ion exchange compounds as corrosion inhibiting and sensing pigments in organic coatings." (12 2004).

2003

• Paglia, C.S.; Ungaro, L.M.; Pitts, B.C.; Carroll, M.C. et al. "The corrosion and environmentally assisted cracking behavior of high strength aluminum alloys friction stir welds: 7075-T651 vs. 7050-T7451." (7 2003).
• Mahajanam, S.P.V.; Buchheit, R.G. "Characterization of Zn-Al-V 10O 28 6- corrosion-inhibiting hydrotalcite pigments in epoxy resins." (12 2003).
• Buchheit, R.G.; Kelly, R.G.; Missert, N.A.; Shaw, B.A. "Electrochemical Society Proceedings: Preface." (12 2003).
• Jain, S.; Buchheit, R.G. "The effect of chromates and chromate conversion coatings on the corrosion of cast AL-SI alloy 356 and AL-SI-CU alloy 380." (12 2003).
• Buchheit,R,G; Guan,H; Mahajanam,S; Wong,F "Active corrosion protection and corrosion sensing in chromate-free organic coatings." in 2nd Workshop on Nanoscale Approaches to Multifunctional Coatings. (9 2003).
• Padgett, B.N.; Paglia, C.; Buchheit, R.G. "Characterization of corrosion behavior in friction stir weld Al-Li-Cu AF/C458 alloy." (7 2003).
• Kim, Y.; Buchheit, R.G. "Electrochemical characterization of passivity and pitting in Al-Cu solid solutions." (12 2003).

2002

• Paglia, C.S.; Pitts, B.C.; Carroll, M.C.; Reynolds, A.P. et al. "Investigating Post-weld Heat Treatments to Increase the Corrosion and the Environmental Cracking Behavior of 7075-T6 Friction Stir Weld." (12 2002).
• Paglia, C.S.; Carroll, M.C.; Pitts, B.C.; Reynolds, T. et al. "Strength, corrosion, and environmentally assisted cracking of a 7075-T6 friction stir weld." (12 2002).
• Di Quarto, F.; Santamaria, M.; Mallandrino, N.; Laget, V. et al. "Physico-chemical characterization of chromate conversion coatings formed on Al substrates." (1 2002).
• Leard, R.R.; Buchheit, R.G. "Electrochemical characterization of copper-bearing intermetallic compounds and localized corrosion of Al-Cu-Mg-Mn alloy 2024." (12 2002).
• Searles, J.L.; Gouma, P.I.; Buchheit, R.G. "Stress corrosion cracking of sensitized AA5083 (Al-4.5Mg-1.0Mn)." (12 2002).

1998

• Buchheit, R.G.; Montes, L.P.; Maestas, L.M.; Hinkebein, T.E. "Corrosion monitoring of concrete-lined brine service pipelines using AC and DC electrochemical methods." (11998).
• Buchheit, R.G.; Martinez, M.A.; Montes, L.P.; Celia, N. et al. "Inorganic Cr-free conversion coatings for high corrosion resistance and low electrical contact resistance." (1 1998).
• Renk, T.J.; Johnson, D.J.; Senft, D.C.; Sorensen, R. et al. "Intense ion beams for surface treatment applications." (1 1998).
• Buchheit, R.G.; Martinez, M.A.; Montes, L.P.; Celia, N.P. et al. "Non-electrolytic formation of Al-oxide surface layers by reversion of hydrotalcite." (1 1998).
• Buchheit, R.G.; Maestas, L.M.; Hinkebein, T.E. "Effects of cement chemistry, admixtures, and inhibitors on Corrosion protection of steel pipelines by interal concrete liners." (11998).
• Buchheit, R.G.; Cunningham, M.; Jensen, H.; Kendig, M.W. et al. "Rapid electrochemical corrosion testing of chemically passivated aluminum alloys." (1 1998).

1997

• Renk, T.J.; Buchheit, R.G.; Sorensen, N.R.; Senft, D.C. et al. "Surface treatment and alloying with high-power ion beams to improve properties in Al-, Fe-, and Ti-based metals." (121997).
• Buchheit, R.G.; Martinez, M.A.; Cooper, C.B. "Corrosion resistant coatings for aluminum by hydrothermal film formation in alkaline Li-salt solutions." (1 1997).
• Sorensen, N.R.; Buchheit, R.G.; Renk, T.J.; Thompson, M.O. "Electrochemical behavior of metal surfaces subjected to pulsed ion beam surface treatment." (12 1997).

1996

• Renk, T.J.; Buchheit, R.; Sorensen, R.; Thompson, M.O. et al. "Pulsed ion beam treatment of metals for improved surface properties." (1 1996).

1995

• Stinnett, R.W.; Buchheit, R.G.; Neau, E.L.; Crawford, M.T. et al. "Ion beam surface treatment: A new technique for thermally modifying surfaces using intense, pulsed ion beams." (121995).
• Buchheit, R.G.; Maestas, L.M.; McIntyre, D.C.; Stinnett, R.W. et al. "Pulsed ion beam surface treatment for preparing rapidly solidified corrosion resistant steel and aluminum surfaces." (12 1995).
• Buchheit, R.G.; Drewein, C.A.; Martinez, M.A.; Stoner, G.E. "Chromate-free corrosion resistant conversion coatings for aluminum alloys." (12 1995).
• Stinnett, R.W.; McIntyre, D.C.; Buchheit, R.G.; Greenly, J.B. et al. "Ion beam surface treatment: a new capability for surface enhancement." (12 1995).

1994

• Stinnett, R.W.; Buchheit, R.G.; Greulich, F.A.; Hills, C.R. et al. "Thermal surface treatment using intense, pulsed ion beams." (1 1994).

1993

• Drewien, C.A.; Hills, C.R.; Buchheit, R.G. "Microstructural characterization of a corrosion-resistant hydrotalcite coating on aluminum." (12 1993).